User`s manual

ECTACO Partner
®
X8 User's Manual
101
• Specify a password up to 8 symbols in length. Touch or
press
. Retype the password for confirmation.
• Touch or press to save the password. The
message New password set will appear. Close the message box
to return to the Security menu.
Setting or changing a password automatically activates the lock-up
mode.
♦ Note: Always remember your password. If you forget it, you will
have to reset the system, which may cause irrevocable loss of
user data.
Security On
If a password is set, the data access is locked:
• Automatically – after a password has been set or changed.
• Automatically – when the device is turned off, if the Auto lock
option is selected in Options in the Security menu.
• Manually – select Lock device in the Security menu.
If Lock device is selected while no password has been set, the
message Password not set will be shown.
Security Off
The Security mode may be suspended by entering a valid password
at the prompt, when:
• The Unlock device option in the Security menu is selected.
• Any of the protected sections is opened.
• Touch or press to turn the Security mode off, which
will be confirmed by the Device unlocked message.
If you make a mistake, the Invalid password! message will appear.