User`s manual

ECTACO Partner
®
X8 User's Manual
102
Change or Remove Password
• Select Set password from the Security menu.
• Enter the old password. Touch or press .
• Enter a new password and retype it for confirmation. Touch
or press
.
♦ Note: To delete a password and turn Security off, leave both
password input fields blank and touch
or press .
The Password cleared, Device unlocked message will confirm
the removal of the password.
Options
• Select Options from the Security menu.
• Select one of the automatic Security modes:
• Auto lock – to automatically activate data security when the
device is turned off (either manually or automatically).
• Don't lock – to keep the current setting unchanged on turn-
off.
♦ Note: If you are concerned with data security, it is recommended
to keep the default setting Auto lock.
♦ Note: With the Auto lock and Resume screen settings (see page
95), if one of the lockable sections is open when the device is
shut down, you will have to specify a valid password to re-enter
this section.
MEMORY CHECK
Instantly check on the free memory status with this option. If the
memory is too low, the next chapter offers a radical solution.