User`s manual

ECTACO Partner

X8 User's Manual

• Install PC-Link.

• When the program is installed, start it from the Start menu,

Programs / Ectaco. The

icon will appear in the lower right

corner of the system tray.

♦ Note: Make sure you selected the appropriate COM port and set

the same baud rate in the System Setup section of your

ECTACO Partner

X8 and in the PC-Link program.

♦ Note: Make sure you have no other PC-Link program running

simultaneously with ECTACO Partner

X8 PC-Link.

♦ Note: The latest version of the PC-Link program and additional

dictionaries can be downloaded from Ectaco's Web site

www.ectaco.com.

Data Transfer

• Connect the PC-Link cable to the Data Link jack located on the

right-hand edge of the device.

• Select PC Communication from the ORGANIZER section.

• Choose a data transfer mode (Upload, Download, or PC

Synchronization).

• To Upload, also specify section(s) to send. To select section(s):

• touch it with the stylus, or

• press Ð, Ï to select the desired section(s) with a dotted

frame, press to check or uncheck the section.