User`s manual

Partner
®
X5 User's Manual
64
Software
• Insert the supplied CD into the CD-ROM drive of a PC. If the
installation program did not start automatically, run the Install.exe
file from the CD root catalog.
• Choose to install PC-Link.
• When the program is installed, start it from the Start menu,
Programs/Ectaco. In the right lower corner of the System Tray,
the
icon will appear.
♦ Note: Make sure you selected an appropriate COM port and set
the same baud rate.
♦ Note: Make sure you have no other PC-Link program running
simultaneously with Partner
®
X5 PC-Link.
♦ Note: The latest version of the PC-Link program and additional
dictionaries can be downloaded from Ectaco's Web site
www.ectaco.com
Data Transfer
• Connect the PC-Link cable to the Data Link jack located on the
right-hand edge of the device.
• Select PC Communication from the ORGANIZER section, or
press
on the keyboard.
• Choose a data transfer mode (PC Synchronization, Upload or
Download).
• To Upload, also specify section(s) to send. To select section(s):
• touch it with the stylus, or
• press Ð, Ï to select the desired section(s) with a dotted
frame, press
to check or uncheck the section.