User manual

ECTACO
®
jetBook
®
COLOR User Manual
12
Power Supply
ECTACO
®
jetBook
®
COLOR is powered by a special Li-Polymer
rechargeable battery. When the battery is fully discharged, the
device might not turn on, even if you connect it to the AC/DC
adapter. If you try to turn on the device when the battery is
depleted, the LED indicator, located under the OK key, will blink
ten times and then turn off. To restore full functionality of the device,
recharge the battery as soon as possible. You may need to charge
the battery for one hour before turning on the ECTACO
®
jetBook
®
COLOR.
Note: The battery is not user-replaceable. Do not disassemble the
device.
How to Recharge the Battery
Only a special charger may be used with your ECTACO
®
jetBook
®
COLOR. Use of an inappropriate external power supply may cause
failure of the device and will void the warranty.
Battery charging is performed via mini-USB port by using the
AC/DC adapter or by a computer with USB-cable. The mini-USB
port is located on the lower edge of the device and protected by a
cover which can be removed by hooking through the small notch
on the case.
Note: Charge the battery overnight prior to the first use of the
device.
It is recommended to charge the battery overnight twice a week.
Depending on the amount of time you work with the device, more
frequent recharging of the battery may be required.
BASICS
The ebook reader is a high-tech equipment which requires careful
handling.
 Tapping screen items is done only with the supplied pointing
device – ECTACO
®
jetBook
®
COLOR stylus.