User manual

ECTACO
®
jetBook
®
COLOR User Manual
14
section or book – whatever was displayed the last time the device
went to sleep will appear on the screen.
If the device is turned off manually as described above, the Main
Menu will be shown after you turn it back on. If you are not
planning to use the device for an extended period of time (for one
week or more), you may want to turn it off.
Working with Touchscreen
Tapping screen items is done with the supplied pointing device
known as a stylus, which, when not in use, is kept in a special slot
at the side of the device's back panel (see page 11). Other pointing
devices cannot be used with ECTACO
®
jetBook
®
COLOR.
Note: If the screen does not respond when you tap it with the
stylus, make sure there is no other stylus in the stylus slot. To
get the touchscreen to work, remove the stylus from the slot at the
side of the device's back panel.
Navigation is also performed by using the buttons located at the
bottom of the front panel, under the screen (see page 10).
To scroll through large lists, tap on the small arrows (triangles) at
the top and bottom of the list. If the arrow is shown unfilled,
scrolling is not needed.
Reading Books
ECTACO
®
jetBook
®
COLOR comes with a set of preinstalled books.
You can access them through the My Library section of the Main
Menu.
 Turn the device on and then wait while the Main Menu is loaded.
If the device is on but the Main Menu is not displayed, use the
key to return to the Main Menu.
 Tap the desired section name. In this case, select My Library.
The My Library section shows all of the available ebooks.