User manual

ECTACO
®
jetBook
®
COLOR User Manual
21
 Make sure the device is turned on.
 Unfasten the USB port cover and then connect ECTACO
®
CPen
®
to the standard USB port on ECTACO
®
jetBook
®
COLOR using the supplied USB cable. On ECTACO
®
jetBook
®
COLOR, the scanner can only be connected to the standard
USB port. It will not work when connected to the mini-USB port.
You will see the ECTACO/C-Pen window with a text area and a
toolbar.
 Select the desired language by tapping the Language button on
the toolbar.
 Place the tip of ECTACO
®
C-Pen
®
before the first character of
your text. The leg with the touch trigger should be below the text
line and the other leg above the text line.
 Keep the touch trigger pressed onto the surface and move
ECTACO
®
C-Pen
®
over the line of text. You can move
ECTACO
®
C-Pen
®
either left-to-right or right-to-left over the text.
 Lift your ECTACO
®
C-Pen
®
. The text will appear in the text area.
Use the TTS button on the toolbar to hear the text pronounced.