User manual

ECTACO
®
jetBook
®
COLOR User Manual
66
Card Capacity gives you the ability to check if there is enough free
space on the microSD card (when it is being used).
Serial Number and Firmware Version are technical data that you
might need when communicating with technical support
professionals.
Wi-Fi
Your ECTACO
®
jetBook
®
COLOR can connect to Wi-Fi access
points that use the 802.11b or 802.11g standard.
Choose the connection type: Auto IP or Static IP. If you chose
Static IP, specify IP Address, Subnet Mask, Gateway, and DNS
Server. The device MAC Address is not supposed to be changed.
 Tap the On button next to Wi-Fi to switch Wi-Fi on. A list of
detected access points will appear.
 Select the desired access point.
 Enter the password (if required) using the on-screen keyboard.
After you finish setting up, turning Wi-Fi on/off may be performed
by sliding the switch to the left and immediately releasing it (see
page 11).
Restore Defaults
Use this command to restore the factory-defined settings. This
action doesn't remove personal files, including fiction books etc.,
from your device.
Deauthorize the Device
Deauthorizing the device removes the authorization from the
system to avoid unauthorized access to DRM-protected files.
Use this command before you dispose of the device (e.g. if you sell
it).