Operating Instructions and Installation Instructions

[
ECTIVE
®
SINUS/SINE INVERTER – CSI-/SSI-SERIES
]
36
Contin-
uous
output
Model
SI-/TSI
Input
voltage
Battery cabel* Fuse/
Unit***
Battery
capacity**
1500 W 152 12 V 10 mm², 2 sets 35 A × 6 ≥250 Ah
154 24 V 6 mm², 2 sets 20 A × 6 ≥125 Ah
158 48 V 4 mm², 2 sets 10 A × 6 ≥60 Ah
2000 W 202 12 V 16 mm², 2 sets 35 A × 8 ≥320 Ah
204 24 V 10 mm², 2 sets 20 A × 8 ≥160 Ah
208 48 V 6 mm², 2 sets 10 A × 8 ≥80 Ah
2500 W 252 12 V 16 mm², 2 sets 35 A × 10 ≥400 Ah
254 24 V 10 mm², 2 sets 20 A × 10 ≥200 Ah
258 48 V 6 mm², 2 sets 10 A × 10 ≥100 Ah
3000 W 302 12 V 16 mm², 2 sets 35 A × 12 ≥480 Ah
304 24 V 10 mm², 2 sets 20 A × 12 ≥240 Ah
308 48 V 6 mm², 2 sets 10 A × 12 ≥120 Ah
4000 W 402 12 V 25 mm², 2 sets 35 A × 12 ≥640 Ah
404 24 V 16 mm², 2 sets 20 A × 12 ≥320 Ah
408 48 V 10 mm², 2 sets 10 A × 12 ≥160 Ah
* One set contains one positive and one negative wire.
** Recommended capacity of the batteries during permanent power.
*** Actual combination of fuses may differ.
ѥ Warning!
Fire hazard!
If 2 sets of battery cables included the scope of delivery, the two of them have to be
installed. Failure to comply the instructions can easily cause an overheating of the over-
loaded cables and even dangerous cable fires.
⚠ Caution!
Please note the capacity!
An underrun of the recommended battery capacity can cause a loss of performance or
serious use restrictions as a result of voltage drops.