User Manual

7
EN
• ALWAYS turn on your transmitter before you turn on the receiver
in the vehicle. Always power off the receiver before turning your
transmitter off.
• ALWAYS operate your vehicle in a wide open area. Operating the
vehicle in a small space or indoors can cause overheating at low
speeds. Operating at low speed increases heat in the electronic
speed control (ESC). Overheating can damage the vehicle and failure
may result.
OPERATION
WHEN YOU ARE FINISHED
1. Power off the ESC. 2. Disconnect the battery.
4. Remove the battery from the vehicle.
3. Power off the transmitter.
5. Recharge the battery.
45-AMP TAZER BL ESC
FORWARD/REVERSE
ELECTRONIC
SPEED CONTROL