User Manual

4
EN
RUCKUS
®
4WD
4WD
WARNING: Failure to exercise caution while using this
product and comply with the following warnings could
result in product malfunction, electrical issues, excessive heat,
FIRE, and ultimately injury and property damage.
Read all safety precautions and literature prior to use of this
product.
Never leave the battery and charger unattended during use.
Never allow children under 14 years of age to charge battery
packs.
Never attempt to charge dead or damaged batteries.
Never charge a battery if the cable has been pinched or shorted.
Never allow batteries or charger to come into contact with
moisture at any time.
Never charge batteries in extremely hot or cold places
(recommended between 50–80°F (10–26°C)) or place in direct
sunlight.
Always use only Ni-MH rechargeable batteries. This charger
cannot charge batteries such as “heavy duty”, “alkaline”,
“mercury” or “lithium” battery.
Always connect to the charger correctly.
Always disconnect the battery and charger after charging and let
them cool between charges.
Always inspect the battery before charging.
Always terminate all processes and contact Horizon Hobby if the
product malfunctions.
Always make sure you know the specifications of the battery to
be charged or discharged to ensure it meets the requirements of
this charger.
Always constantly monitor the temperature of the battery pack
while charging.
Always end the charging process if the charger or battery
becomes hot to the touch or starts to change form during the
charge process.
Always charge in a well ventilated area.
2.4GHZ DIGITAL
RADIO SYSTEM
1. ECX
®
Ruckus
®
1:18-scale 4WD Monster Truck
2. STX2 2-channel 2.4 GHz FHSSTransmitter (SPMRSTX200)
3. AA Batteries (4)
4. 7.2V 900mAh Ni-MH Battery
(DYN1462)
5. 100mAh Wall Charger
2
1
3
4
5
COMPONENTS
CHARGING WARNINGS
CHARGING THE VEHICLE BATTERY
1. Connect the battery pack to the charger.
2. Connect the charger to an AC power source.
3. Allow the battery pack to charge for 9 hours.
NOTICE: The vehicle battery charger produces 100 milliamps
per hour. Divide the battery capacity (mAh) on the label by 100 to
determine how long the battery needs to charge. For example, a
900mAh battery requires 9 hours to charge.
WARNING: This charger is only designed to charge NiMH
batteries. Never use this charger with a Li-Po battery.