Instruction manual

7
EN
circuit
GETTING STARTED
1. Power on the transmitter.
3. Do a test of the transmitter’s control of the vehicle with
the vehicle’s wheels off the ground.
4. Start driving slowly, and, if the vehicle does not go
straight, adjust the steering trim dial on the transmitter.
IMPORTANT: Seat the motor brushes by driving smoothly
on a fl at surface during use of the fi rst battery charge.
Properly seating the motor brushes will increase the life and
performance of the motor.
2. Power on the ESC.
INSTALLING THE VEHICLE BODY
POWER
ST. TRIM
TH. TRIM
ST.