User manual

EN
5
INSTALLING THE WING
1. Remove the long wing clip from the wing mounts.
2. Align the holes in the wing with the wing mounts.
3. Pressthewingontothewingmounts.
4. Secure the wing by sliding the long wing clip through
the wing mounts.
INSTALLING THE BATTERY IN THE VEHICLE
REMOVING/INSTALLING THE VEHICLE BODY
Removing
1. Remove the two body clips.
2. Pull off the body.
Instaling
1. Install the body over the two body posts.
2. Install the two body clips.
1. Loosen the hook and loop straps.
2. Install a fully charged battery.
3. Tightenthehookandloopstraps.
• Neverinstalldamagedbatteries.
• Neverinstallbatteriesofmixedtypesorofdifferentages
in the transmitter.
• Alwaysremoveexhaustedbatteries.
• Alwaysremovebatteriesbeforestoringthetransmitter.
• LowbatterypowercanresultinlossofcontroloftheRCvehicle.
TRANSMITTER BATTERY SAFETY PRECAUTIONS