Quick Start Guide

8
Powering your VeeaHub
2
Grounding your unit
The VHH10 unit must be properly grounded fi rst to ensure reliable operation, help dissipate
lightning eff ects and prevent buildup of static charge. The grounding connection must be
securely and eff ectively connected to an actual earth ground. A grounding stake, grounded pole
or similar grounded metal structure may be used.
Powering your unit with Power over Ethernet (PoE)
A PoE switch or a cable injector may be used to power this unit. The VHH10 is classifi ed as an
802.3bt Type 4 device which can consume up to 90W. However, the VHH10 has a typical power
consumption of less than 60W.
Powering your unit using a separate DC Power Cable
Refer to Pages 22-23 for power cable connections. When using a separate DC power cable, use a
minimum 14# conductor cable of Maximum length 50 feet.