User's Guide

8 / 13
/system/etc/firmware/wl mpc 0
/system/etc/firmware/wl phy_watchdog 0
/system/etc/firmware/wl country ALL
/system/etc/firmware/wl band b
/system/etc/firmware/wl channel 1(see note 1)
/system/etc/firmware/wl up
/system/etc/firmware/wl phy_forcecal 1
/system/etc/firmware/wl scansuppress 1
/system/etc/firmware/wl pkteng_start 01:00:00:C0:FF:EE rxwithack
Note: channel 1,1 we can change it to 1-13
5g Rx command
/system/etc/firmware/wl down
/system/etc/firmware/wl mpc 0
/system/etc/firmware/wl phy_watchdog 0
/system/etc/firmware/wl country ALL
/system/etc/firmware/wl band a
/system/etc/firmware/wl channel 36(see note 1)
/system/etc/firmware/wl up
/system/etc/firmware/wl phy_forcecal 1
/system/etc/firmware/wl scansuppress 1
/system/etc/firmware/wl pkteng_start 01:00:00:C0:FF:EE rxwithack
Note 1: fqacurcy 36, 36 means channel 36, we can change it to 36, 40, 44, 48, 52, 56, 60, 64,
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
After send Rx command, send blow command, we will get the recive packet, then we
can caulate the PER.
/system/etc/firmware/wl pkteng_stop rx
/system/etc/firmware/wl counters
Reset counters command
/system/etc/firmware/wl reset_cnts