User's Manual

Acclarix AX3 Series Diagnostic Ultrasound System User Manual Safety
- 5 -
 Please read and understand cleaning instructions prior to use.
 Please read and understand maintenance instructions prior to use.
 Please read and understand instructions for system operation prior to use.
 Studies stored on the system hard drive should be archived regularly. The system is not
intended for long term storage of patient information. Confirm successful archiving before
deleting a study from the hard drive.
 Ensure that the system vents are clear and unobstructed.
 Confirm patient identification information prior to storing or printing any exam information.
 If you have any questions about maintenance, technical specifications, or system functionality,
please contact your local distributor or Edan Service at: [e-mail]
 Ultrasound images occasionally have artifacts, and should only be used as one part of an
overall clinical assessment.
 To avoid electrical shock, turn off and disconnect the device from the AC power source before
cleaning and disinfecting.
 No user serviceable parts are inside the system. All repairs on the system must be performed
by EDAN certified service personnel.
 The device and accessories are to be disposed of according to local regulations after their
useful lives. Alternatively, they can be returned to the dealer or the manufacturer for recycling
or proper disposal.
 The packaging is to be disposed of according to local or hospital‟s regulations; otherwise, it
may cause environmental contamination. Place the packaging at a location that is
inaccessible to children.
 Patient data transmitted by the system is not encrypted. Please ensure the physical security of
the network. If WiFi is used, use WPA2 protocol and require a WiFi password.
 Only use upgrade files with known provenance. Confirm that the system boots to imaging after
an upgrade.
 Properly dispose of used cleaning agents or disinfectants according to your hospital's
regulations.
 The system does not need calibration as part of routine maintenance.
Transducer Cautions
 Do not use disinfection agents beyond their expiration date.
 Do not use sterile sheaths beyond their expiration date.
 Inspect the transducer connector, cable, and head periodically. Do not use if there is evidence
of excessive wear or damage.
 Do not operate the transducer to temperatures in excess of 40°C or store the transducer in
temperatures in excess of 55°C.
 Do not kink or pull on the transducer cable.
 Broken or bent connector pins can cause image artifacts. Do not use a transducer with broken
or bent pins.