User's Manual

Acclarix AX3 Series Diagnostic Ultrasound System User Manual Utilities
- 105 -
Image Type: Each imaging mode has a set of image types. For example in B-mode the types are
Detail, General, and Penetration. While imaging, the image type lets you quickly change the aesthetic
look of the image without changing settings like depth or invert status. The right side of the preset
set-up screen shows a tab for each image look. The parameters shown below those tabs let you
customize that image type for the current preset.
10.3.3. Comment Preset
Figure 10-6 shows an example set-up screen for Comment Preset, where you can add or edit the
comment texts of each Comment preset.
Figure 10-6 Comment Preset Screen
Editing Comment Preset:
Select a comment preset from the preset list on the left side of the screen, and then you can do the
followings to edit the comment texts for the selected preset.
 Adding a new Comment:
1. Move the cursor to a blank block and press <Set>.
2. Enter a new comment through keyboard.
 Editing an Exist Comment in Comment Preset:
1. Move the cursor to a comment and press <Set>.
2. Edit the selected comment through keyboard.
 Deleting an Exist Comment in Comment Preset:
1. Move the cursor to a comment and press <Set>.
2. Press Delete key on the keyboard to delete the selected comment.
General Settings:
 Auto-erase comments when the image is unfrozen: If this option is enabled, the comments
will be erased when the image is unfrozen, otherwise the comments will only be erased on
demand or at the start of a new exam.
 Continuous Arrow: If this option is enabled, you can add multiple arrows continuously by
pressing <Set> key after Arrow touch button is enabled in Comment function. If this option is
disabled, only one arrow can be added after Arrow touch button is enabled. A second arrow is
added by pressing Arrow touch button again.