User's Manual

Acclarix AX3 Series Diagnostic Ultrasound System User Manual Utilities
- 109 -
11 Utilities
To open the Utility screen:
1. Press <Cursor> key to display the cursor;
2. Move the cursor to the Utility icon displayed at the lower left corner of the screen;
3. Press <Set> key.
The Utility screen provides access to System setup, Presets, Connectivity, Maintenance and Screen
adjust. Each of these is described in separate sections.
11.1 System Set-up
System setup is used to configure parameters that are unrelated to presets. Generally, there is one
value of each system setup parameter that is shared across all presets.
Entering System Set-up:
Open Utility screen. Press Set up touch screen button, and then the System touch screen button to
access system setup.
Reloading Factory Default Settings:
1. Press “Restore Factory Settings” on the System Settings screen, you are prompted “Restore
System Setting to factory default? This will erase all system data."
2. Press Yes to restore to factory default, and press No to cancel.
11.1.1. General Set-up
Figure 11-1General Set-up Screen