User's Manual

SE-1010 PC ECG User Manual Configuring the System
- 128 -
9.3.4.1 Creating a New Protocol
Click on the New button in the Device window (Figure 9-3) to enter the Edit the protocol
window.
1. Enter the protocol name in the Protocol Name textbox.
2. Right-click on the grid to display the menu , click on Add Stage, and enter
information in the grid.
3. Set the auto printing time of 12-lead ECG reports in the 12-lead ECG Report (First) and
12-lead ECG Report (Repeat) columns.
4. Set the auto BP sampling time in the BP (First) or BP (Repeat) columns.
5. After entering all the information, click on the OK button.