User's Manual

SE-1010 PC ECG User Manual Configuring the System
- 143 -
9.8.1 Setting Unit and Color
Set the height unit to cm, inch or mm.
Set the weight unit to Kg, g or Pound.
Set the BP unit to kPa or mmHg.
Set the speed unit to Km/h or mph.
Set the grade unit to % or degree.
Set the time mode to 24Hour or 12Hour.
Set the date mode to MM-DD-YYYY, DD-MM-YYYY OR YYYY-MM-DD.
Set the color of the background, waves, grid (5mm), grid (1mm), mark and text. If you want to
change a color, double-click on the color block to display the Color window, and then you can
select your favorite color.
Click on the Default button to restore the default colors.
9.8.2 Setting System Password
You can set a system password to avoid the system setting being modified. Click on the Set
Password button in the Others window, enter the same password for twice, and then the system
password is set successfully.
After a successful password setting, you should have a correct password to enter the System
Setting window. Otherwise, the system will give hint information to prevent your access.
9.8.3 Setting Wave Width and Grid Width
You can adjust Wave Width, Grid Width (5mm) and Grid Width (1mm) of report by using the
up or down arrow. The adjustable range is: 1~5.
NOTE: The width may vary with the type of printer.