User's Manual

SE-1515 PC ECG User Manual Introduction
- 13 -
1) Insert plug 1 of the patient cable into socket 2 of DE15 ECG sampling box.
2) Insert plug 7 of the cable into socket 3 of DE15 ECG sampling box.
3) Insert plug 8 of the cable into the USB socket of the PC.
4) Connect plug 6 of the cable to the BP monitor (for exercise ECG only).
5) Connect a treadmill or an ergometer to the PC (for exercise ECG only).
6) Connect a printer to the PC.
7) Insert the Sentinel into the USB socket of the PC if the Sentinel is purchased.
8) Make sure that the above parts are properly connected, and then connect the PC,
treadmill/ergometer and printer to the power supply.
2.1.3 ECG Sampling Box
WARNING
1. When the computer connected to the USB cable is powered on, do not connect the
USB cable to the ECG sampling box; when the system is powered on, do not
disconnect the USB cable from the ECG sampling box.
2. It is not necessary or recommended to regularly disconnect the USB cable from the
ECG sampling box. Disconnect the USB cable from the PC if necessary.
3. When connecting the sampling box to the PC, do not connect them via an USB HUB.
4. When a sampling box is connected the PC, no other device should be connected to the
PC for battery enchargement through an USB cable.
2.1.3.1 DE15/DE18 ECG sampling box
Name
Explanation
Indicator
When the ECG sampling box is powered by the PC, the
indicator will be lit.
USB Interface
Connecting to the USB socket of the PC with a USB cable
USB Interface
Indicator