User's Manual

SE-1515 PC ECG User Manual ECG Sampling
- 48 -
4.4.3.1 Buttons
NOTE:
1. You can use F1–F9 on the keyboard directly to control the ECG sampling screen.
2. No matter how many changes on the speed or slope you make in a stage, the
software only saves the latest one.
Button
Description
Pretest
F1
On the presampling screen, you can click Pretest to enter the pretest stage.
On the sampling screen, you can click Pretest to move into the next pretest
stage.
Exercise
F2
In the Pretest stage you can click Exercise to move into the exercise stage.
In the Exercise stage, you can click Exercise to move into the next exercise
stage.
NOTE: This function cannot be used when the sampling has been in
the last Exercise stage.
Recovery
F3
In the Exercise stage, you can click Recovery to move into the Recovery
stage.
In the Recovery stage, you can click Recovery to move into the next
Recovery stage.
NOTE: This function cannot be used when the test in the last Recovery
stage.
Stop
F4
Once Stop is clicked, the system stops sampling and refreshes the waveforms,
and displays a window.
In the displayed window, you can select or manually input the reason for test
termination. The reason input manually will be saved as an option for the next
time.
Print/Setting
F5
 In the presampling stage, Setting is displayed.
Click Setting and the Setting window will be displayed. You can
configure the related parameters in this window.
NOTE: The Sample Setting, Print Setting, and Others windows
for the exercise ECG are the same as those for the resting
ECG. For details, see section 4.4.1.4, section 4.4.1.5, and
section 4.4.1.7.
 During the test, Print is displayed.
Click Print and the system will print the 12-lead waveform report in the
last 10s. If the paper used can only be printed with the an ECG of Xs