User's Manual

SE-1515 PC ECG User Manual System Setup
- 80 -
Server IP/Server
Port/Server AE/Client AE
Set Server IP/Server Port/Server AE/Client AE to the server
IP/server port/server AE/client AE used for the DICOM Worklist
system.
DICOM Store Setting
Set the time when DICOM files are stored to the server.
8.7 HL7 Setup
NOTE: This is an optional advanced function. To activate it, please contact the local
distributor.
The ECG workstation allows obtaining patient information and uploading files through the HL7
workflow.
8.8 Barcode Setup
Item
Description
Barcode Setting
Configure the Start Address, End Address, Male Code/Female Code,
and Device Port for each sub-item based on the actual situation.
NOTE: Only the USB bar code reader recommended by the
manufacturer can be used.
1. If the bar code reader is connected before starting the software, the software automatically
detects the reader. In this case, you can use it without port configuration or initialization.
2. If the bar code reader is connected after starting the software, you have to initialize the bar
code reader in System Setting.
3. If the initialization fails, you have to manually configure the port by performing the
following operations:
1) Connect the USB bar code reader to the computer.
2) On the computer, click Start and right-click on My Computer, and then choose
Manage.