User's Manual

PADECG User Manual Operation instructions
- 22 -
Key
Description
Start/Stop
Press this button to start/stop sampling ECG data.
NOTE: At most 180s ECG data can be sampled.
100Hz
EMG Filter: Off, 25Hz, 35Hz or 45Hz
Lowpass Filter: Off, 75Hz, 100Hz or 150Hz
NOTE: This setup modified on the pre-sampling screen is only effective
for the current patient.
10mm/mV
Gain: 2.5 mm/mV, 5 mm/mV, 10 mm/mV or 20 mm/mV
25mm/s
Speed: 5mm/s, 12.5mm/s, 25mm/s or 50mm/s
Patient
Press to enter the patient screen.
File
Press to enter the file manager screen.
NOTE: Long press the tablet screen during ECG data pre-sampling, the display mode of
12-channel ECG waves will be switched among 12×1, 6×2+1 and 3×4+1.
4.3 Analyzing ECG Data
The system will automatically enter the ECG Analysis screen after sampling ECG data. ECG data
can be displayed with the following style: 12×1, 6×2+1, and 3×4+1.
1. Viewing ECG waveform
Long press the rhythm waveform to display the Rhythm Lead window on the 6×2+1 or
3×4+1 ECG Analysis screen. You can view other rhythm waveform by selecting one lead in
the pop-up window.
You can view other waveforms by dragging or clicking on the rhythm waveform on the
6×2+1 or 3×4+1 ECG Analysis screen.
2. Amplifying and measuring ECG waveform
Multi-touch on the ECG waveforms of the ECG Analysis screen can be used to amplify or
minify the ECG waveforms.
If more than 10s ECG data has been sampled, a scrollbar will appear above the ECG
waveforms. You can slide the scrollbar to adjust the time period of the waveforms to be
displayed. During sliding, the start time and end time of the displayed 10s ECG waveforms
will be shown. You can click "+" or "-" to view the 10s ECG waveforms 5s later or earlier.