User's Manual

PADECG User Manual Operation instructions
- 24 -
6. Hiding or displaying measure information and diagnosis results
On the ECG Analysis screen, you can slide the ECG waveforms upward to hide measure
information and diagnosis results or downward to display them again.
7. Email
Click on on the analysis screen, and then you can Email files by clicking on the Send
Email button. The procedure is as follows:
1) Add an Email account.
If no Email account is set, add one in the following directory: iPad>Mail, Conatact,
Calendars.
2) Set default Email information in the following directory: PADECG>System
Settings>Transmission Setting>Email Settings.
3) Click on the ECG analysis screen and select Sending Email.
If no default Email information is set, a dialog box requiring report format selection will
be displayed. After the file format is selected, the current file will be added to the mail
editing window as an accessory. Input the receiver address before sending it.
8. Edit
Click on the analysis screen, and then you can click Edit to modify patient
information.
4.4 Printing Reports
We suggest that the report be printed out on a printer to diagnose and sign.
To print a report, the tablet should be connected to a PC which is installed with the SE-1515
analysis software or an FTP server by setting the IP address and FTP parameters of the PADECG
analysis software. For details, please refer to "FTP Setting" in section 4.6.4 "Transmission
Setting".
To use the FTP server, configure it before connecting to the PC. For details please contact the
local distributor or the manufacturer.
NOTE:
1. This function is available only under network connection.
2. Not all options related to SE-1515 are available.
WARNING
The printouts need to be done with no scaling or sizing done to fit the page.