Use Instructions

Vital Signs Monitor User Manual Spot-checking Mode
- 28 -
7.2 Editing Patient Information
To edit the patient information after a patient has been admitted, click the patient information
area in main interface to enter Patient Info window, and make the required changes on the popup
interface. Click the icon to confirm the operation.
If the monitor is powered off and restarted, the patient information will be restored by default,
that is, the patient type is adult and the other information is blank.
7.3 Save and Review
Save spot-checking record
Click Save in main interface directly to store one group of measurement data. The storage time is
the ward round record time.
Review spot-checking record
Click Review in main interface directly to pop up Review window in which user can perform
following operations.
1 Multi-selection: click icon on the upper right area to select data and Upload to
the network server, or Export to removable storage device, or Print data, or
Delete the selected data.
Before uploading, the device should be connected with network server. Please refer to
chapter HL7 Communication for details. Data uploaded successfully will be marked with
icon .
2 Single selection: click one group of data to view detailed patient information, measurement
data, operator information, filing information, etc.
4. Filter operation: user can Filter the data by All, Uploaded or Not Uploaded. And the data
will be displayed according to the filtering result.
If monitor is powered off, the parameters data in main interface will be cleared and spot-checking
data will be stored.