User's Manual

Patient Monitor User Manual Alarm Information
- 51 -
Message Cause
Measure over After the Predict measuring is over, the data and message
display on the interface.
Measure time out No measuring result after the module entering Predict
state for 30s.
AG Standby AG module is operating in the standby status.
5.4 Adjustable Range of Alarm Limits
ECG alarm limits are listed as follows: unit (bpm)
Patient Type ALM HI ALM LO
HR ADU 300 15
PED 350 15
NEO 350 15
ST analysis alarm limits are listed as follows: unit (mV)
ALM HI ALM LO
ST 2.0 -2.0
PVCs alarm upper limits are listed as follows:
ALM HI ALM LO
PVCs 10