User's Manual

Acclarix LX3 Series Diagnostic Ultrasound System User Manual Utilities
- 149 -
Join: This joins the selected network. If a password is needed a dialog box will be displayed to
enter it.
Forget Network: This forgets any password of the selected network that had been entered, but
the network is still shown in the list.
Advanced Settings: This brings up a dialog box with additional settings for the selected wireless
network. The dialog box includes the following:
 Password: This is useful when the network password has changed.
 Method: Either Manually entered (Static) or DHCP. Generally wireless networks use
DHCP, and a Static address is only needed if required by the target PACS system.
 IP Address, Subnet Mask, Gateway, DNS: If you chose DHCP then your network router
will set these automatically. If you chose Manually Entered IP then contact your network
IT manager for the appropriate settings.
11.2.2. DICOM
This screen configures DICOM services, including Store and Modality Worklist.
Figure 11-9 DICOM Settings
Local Settings:
These settings determine how the system communicates with other DICOM devices. These are
required for both Store and for Modality Worklist.
Local AE Title: Any 16 characters that uniquely identify this system on your DICOM network. The
default “EDAN_STR_SCU” will work unless you have multiple Edan systems on your network.
Time Out: This determines the time after which this system will stop trying to establish a
connection to the DICOM server.
DICOM Store: This determines when DICOM images and clips are sent to the server. The
options are: