User's Manual

Acclarix LX3 Series Diagnostic Ultrasound System User Manual Imaging
- 56 -
Figure 5-3 3D Image Review
There are two image modes: Volume imaging mode and multi-slice imaging mode. Figure 5-3 shows
Volume Imaging Mode in quad screen with a Baby Face volume rendering.
 Quadrant A shows a slice through the data that mimics the original ultrasound image.
 Quadrant B is orthogonal to A, as if the transducer had been rotated 90 degrees.
 Quadrant C is orthogonal to A and B, showing a slice that is parallel to the transducer face.
The following table shows the touch screen controls that are available in Volume Imaging Mode
Name Control Description
Volume/
Multi-slice
These two radio buttons toggle between the Volume display
and the Multi-Slice display.
A/B/C/3D
These four radio buttons select which quadrant is the focus
of the navigation/panning controls. A/B/C are three
orthogonal slices through the volume, while ‘3D’ is the
rendered image.
Reset
Reset the operation of pan, rotate and zoom to the initial
condition.