User's Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual Measurements and Reports
- 111 -
4. Press the <Set> key to fix the start point.
5. Move the caliper to the end point.
Presses of the <Update> key will toggle between active calipers, allowing you to adjust the
position of start point and end point.
6. Press the <Set> key to fix the end point and complete the measurement.
8.1.2.2. Slope
The Slope measurement measures the distance and time between two points, and calculates the
slope. To measure Slope:
1. Invoke the generic measurement function.
2. Select Slope.
3. Move the caliper to the start point.
4. Press the <Set> key to fix the start point.
5. Move the caliper to the end point.
Presses of the <Update> key will toggle between active calipers, allowing you to adjust the
position of start point and end point.
6. Press the <Set> key to fix the end point and complete the measurement.
8.1.2.3. Time
The Time measurement measure the time interval between two points. To measure Time:
1. Invoke the generic measurement function.
2. Select Time.
3. Move the caliper to the start point.
4. Press the <Set> key to fix the start point.
5. Move the caliper to the end point.
Presses of the <Update> key will toggle between active calipers, allowing you to adjust the
position of start point and end point.
6. Press the <Set> key to fix the end point and complete the measurement.
8.1.2.4. HR
The HR measurement measures the time interval between two points, and calculates the heart rate.
To measure HR:
1. Invoke the generic measurement function.
2. Select HR.
3. Move the caliper to the first heartbeat.
4. Press the <Set> key to fix the start point.
5. Move the caliper to the next beat.
Presses of the <Update> key will toggle between active calipers, allowing you to adjust the
position of start point and end point.
6. Press the <Set> key to fix the end point and complete the measurement.