User's Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual Measurements and Reports
- 136 -
8.3.1.2. Editing Worksheet
Move the cursor over an editable field such as a measurement result, and press the <Set> key. A
touch QWERTY is automatically invoked. Or, you can used the physical keyboard of the system. Type
in your changes and press the Enter key to save the changes. After editing a result, an asterisk mark
will be displayed as a superscript to indicate this is a manually edited value.
8.3.1.3. OB Worksheet
Please see section 8.3.1.1 Viewing Worksheet for an overview of worksheet. This section describes
worksheet capabilities that are unique to OB.
In Obstetric exams, press <Report> key on the console to open OB worksheet, see the figure below:
Figure 8-9 OB Worksheet
No.
Name
Description
A
LMP
Displays last menstruation period of the patient. If the LMP was entered
on the Patient Information page that date is transferred to here.
B
GA
Two different versions of the GA are displayed:
 Clinical GA: Calculated from the LMP.
 GA(CUA) or GA(AUA): Displays Composite Ultrasound Age(CUA) or
Average Ultrasound Age(AUA), depending the Default GA display
configured in Measure Preset(see section 10.4 for details).
C
EDD
Two different versions of the EDD are displayed based on the two GA
values.
D
Reference
Click to select the equation used to calculate the GA.
E
CUA(or AUA)
These checkboxes let you decide which results are included in the CUA
or AUA calculation. CUA is calculated from the selected BPD, HC, AC
and/or FL measurement result; AUA is the averaged value of the
selected GAs calculated from single parameter including BPD, HC, AC,
FL etc. Whether CUA or AUA is displayed depends on the Default GA
display configured in Measure Preset(see section 10.4 for details).