User's Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual Utilities
- 168 -
to the nature of DICOM, images that are already sent can not be deleted from the
server from the system.
 Auto Transfer when End Exam: Images, clips and structured reports are sent
automatically when the exam is ended. This is the most common setting.
 SR Configuration: This brings up a dialog box for detailed structured report configuration.
The dialog box includes the following:
 Send SR with Images: This will enable the function of sending structured report
together with images to a DICOM server.
 Report Type: This determines the type of structured report. Select Enhanced report
or Comprehensive report according to the report type your PACS system requires.
 Data Configuration: This determines whether a report with All Results or with only
Summary Results will be sent. All results include all the individual measurement
results of each measurement and its summary results in the worksheet, while
summary results come from all the individual measurement results by the method of
average, maximum, minimum or last which is decided by the user in the worksheet.
 Sequence Delimiter: This determines the method to indicate the end of a DICOM
sequence. Undefined and Explicit are available.
11.2.2.3. Modality Worklist Settings
Click Worklist key on the left side of main screen, and the right half screen switches to Modality
Worklist setup, where you can configuring Modality Worklist.
 Enable: Turns Modality Worklist on/off.
 Server: Selects a configured server from the drop-down list as the default server to query
for the worklist.
 Comment Source: Modality Worklist can fill the ultrasound comments section from the
server. Depending on
 Patient Comments: Obtains comments from DICOM tag (0x0010,0x4000);
 Scheduled Procedure Description: Obtains comments from DICOM tag
(0x0040,0x0007)
 Comments on Schedule Procedure: Obtains comments from DICOM tag
(0x0040,0x0400)
 Update Worklist: Determines when the worklist is updated. Choices are:
 On Demand: Updates only when the Update button is pressed from the patient page.
 Every 15 Minutes: Updates on power-up and then regularly every 15 minutes.
 Every hour: Updates on power-up and then regularly every hour.
 On Start of Exam: Updates when the patient page is displayed at the start of each
exam.
 Date Range: The range of dates for the worklist query. Note, the option of “Yesterday
and Tomorrow” includes today‟s exams.
 Map SPSD: Checking this item, the Study Description on Patient information page will
show study description and as well as SPSD(Scheduled Procedure Steps Description)
obtained from Worklist server. Otherwise only shows the study description.