User's Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual Exam Operation
- 39 -
calculated. An A GA more than 42W6D days is considered invalid.
 Fetus: Enter 1 up to 4 for multiple gestations.
 G/P/A: G stands for Gravida, P stands for Para and A stands for Aborta. Enter values for each
in the fields separated by slashes.
 Study Description: enter the study description.
 Height: Enter the patient‟s height. The units can be set in the Patient section of Setup.
 Weight: Enter the patient‟s weight. The units can be set in the Patient section of Setup.
 BSA: Body Surface Area, it is auto-calculated and displayed when Height/Weight is entered.
 HR: Enter the Heart Rate.
 BP: Enter the Blood Pressure.
 PSA: Prostate Specific Antigen.
 PPSA Coefficient: Predicted Prostate Specific Antigen.
 Ref. Physician: Enter the name of the Ref.Physician.
 Dx. Physician: Enter the name of the Dx.Physician.
 Operator: Enter the name of the person performing the exam.
 CPT code: Current Procedural Terminology code.
 <Custom field 1>: Enter the user-defined data.
 <Custom field 2>: Enter the user-defined data.
 Comments: Enter any additional comments.
While the Patient Information Page is displayed the following buttons are displayed on the touch
screen and Patient Information Page:
 Press Start Exam to exit the Patient Page function and return to B-mode imaging with the
newly entered demographic data for the active exam.
 Press Cancel to exit the Patient Information Page without storing any of the entered data.
 Press Clear All to clear all of the demographic fields except for name and ID.
 Input LMP, and press Prior Exam to enable the entry of previous OB exam data for fetal
trending details. This option is only available when an OB preset is selected.
4.5 Modality Worklist
Modality worklist provides a list of scheduled patients derived from a DICOM server. It is available only
when a DICOM server is configured and worklist is enabled.
When the modality worklist function is enabled and configured in DICOM Connectivity screen, the
worklist is shown to the left of the Patient Information Page, as shown below.