User's Manual

Acclarix LX9 Series Diagnostic Ultrasound System User Manual Transducers and Biopsy
- 82 -
Image Orientation Mark
The image orientation marks on the display screen and on the transducer are shown as below. The
side of orientation mark on the transducer corresponds to the side of orientation mark on the display
screen. Ensure orientation marks on the display screen and transducer are on the same side prior to
scanning.
Figure 6-2 Image Orientation Mark
Proper Use of Transducers
To extend the service life and maintain optimum transducer performance, please operate as follows:
 Inspect transducer cable, socket and acoustical window of the transducer periodically.
 Shut down the machine before connecting or disconnecting the transducer.
 Do not drop the transducer onto the floor or collide with hard objects. Otherwise it will be
damaged easily.
 Do not heat the transducer.
 Do not pull or bend the transducer cable.
 Coupling gel can only be used on the head of the transducer, and it should be wiped off after use.
 Clean and disinfect the transducer after every use.
 The acoustical window and the shell of the transducer should be examined frequently.
CAUTION
1. Do not disinfect or clean transducers under high temperature. The temperature should be below
45°C.
2. To avoid damaging the device, the disinfection method is limited to regular maintenance of
devices in hospitals. Disinfecting instruments should be cleaned first.
3. The coupling gel adapted to the transducer is a medical ultrasound coupling gel. Use only
ultrasound coupling gel that complies with local regulations.
Orientation Mark
Orientation
Mark