User's Manual

SD5/SD6 Ultrasonic TableTop Doppler User Manual Basic Operation
- 21 -
4 Press the Setup key.
3.8.3 Setting Auto-Shut-Off Time
The Auto-Shut-Off feature facilitates the economical use of the Doppler. The main unit will
switch off automatically after no signal is received and no operation is performed for 1 minute，
3 minutes or infinite time.
1 Press the Setup key for about 2 seconds to open setup menu.
2 Press the Up/Down key to move the cursor to Auto Shut Off, press the Setup key.
3 Press the Up/Down key to move the cursor among options.
4 Press the Setup key.
3.8.4 Choosing Language
1 Press the Setup key for about 2 seconds to open setup menu.
2 Press the Up/Down key to move the cursor to Language, press the Setup key.
3 Press the Up/Down key to select the required language.
4 Press the Setup key.
3.8.5 Setting Date and Time
1 Press the Setup key for about 2 seconds to open setup menu.
2 Press the Up/Down key to move the cursor to Real Time Clock, press the Setup key.
3 Press the Setup key when the cursor stays at Hour.
4 Press the Up/Down key to choose a number from 00 to 23 and then press the Setup key to
confirm the choice.
5 In the same way, choose the Minute from 00 to 59. Choose the Year, Month and Day.
6 Move the cursor to EXIT and then press the Setup key.
3.8.6 Setting Date Format
You can choose to switch the date on or off. When it is on, the date format has three options:
DD/MM/YYYY, MM/DD/YYYY and YYYY/MM/DD.
To switch the date on and off or change date format:
1 Press the Setup key for about 2 seconds to open setup menu.
2 Press the Up/Down key to move the cursor to Date Format, press the Setup key.
3 Press the Up/Down key to toggle between ON and OFF. If you choose ON, the cursor
moves to the date format. Select a format.
4 Press the Setup key.
NOTE:
If no operation is performed in 30 seconds, the device will exit from the setup menu. The