User's Manual

SE-301 Series Electrocardiograph User Manual Settings
- 31 -
Auto Record
Length
Choose from: Short (2.5s), Medium (5s) and Long (10s)
NOTE: Auto Record Length is corresponding with Record
Device, Sampling Mode and Record Sequence.
Manual Style
Choose from 3 channels and 1 channels
Select a style to print the ECG waves in the manual mode.
Rhythm Record
Mode
Choose from: Save Paper or Quickly
Select Save Paper, 10s after pressing the PRINT/STOP key on the main
screen, an ECG report is printed in the RHYT mode.
Select Quickly, pressing the PRINT/STOP key on the main screen to
begin printing an ECG report immediately in the RHYT mode.
Paper Marker
Paper Marker is used to identify the start point of each page of the
recorder paper.
Choose from: Yes or No
Select Ye s if the paper with black markers on the bottom is used, and the
device can identify the start point of each page of the recorder paper while
printing ECG reports.
6.3.2 Setup 2
Item Description
Measure
Choose from: On or Off
When it is set to On, the Measure information will be printed in the ECG
report.
Analysis
Choose from: On or Off
When it is set to On, the Analysis information will be printed in the ECG
report.
Template
Choose from: 2×6+1R, 3×4 or Off
When it is set to Off, the template will not be printed in the ECG report
Position Marker
Choose from: On or Off
When it is set to Off, the template printed in the ECG report will not have
position marker.
Minnesota Code
Choose from: On or Off