Product Manual

SE-2003&SE-2012 Holter System Recorder User Manual
- 34 -
WARNING
1. Electrodes are for one-off use only as they may cause cross infection between
different patients. Repeated use is forbidden!
2. For disposal of abandoned electrodes, please follow hospital requirements or local
laws and regulations. Do not discard them carelessly.
After necessary cleaning and disinfection to recorder and leads, it is well prepared for the next
patient.
5.5 Data Transmission
After the end of recording, the collected data shall be transmitted to analysis software to make
analysis and diagnosis. SE-2003/SE-2012 supports transmission by SD card or connection by
USB cable. And these two methods are equally effective:
5.5.1 Transmit by SD Card
Take out SD card from recorder and insert it into card-reader of analysis system. Recording data
is then transmitted.
NOTE: It is recommended to equip one recorder with two SD cards so as to facilitate
patient turnover. Move to next patient quickly by change of SD card only.
5.5.2 USB Connection
1. Connect USB cable distributed together with recorder directly with host of analysis system.
Remove patient cable plug and insert USB cable into the socket. Recording data will be
transmitted into analysis system through high-speed USB 2.0.
2. Check whether battery is loaded or not when recorder connects with computer through USB
cable;
3. When USB cable is connected with recorder, LCD will display as follows: