Product Manual

F6 and F6 Express Fetal & Maternal Monitor User Manual Maintenance and Cleaning
- 100 -
12.3 Disinfecting
Clean the equipment before disinfecting.
The table below lists the allowed disinfectant bases:
Type Ethylate Acetaldehyde Recommended
Transducers
√ √
DECG Cable
√ √
IUP Cable
√ √
ECG Leads
√ √
SpO
2
Transducer
√ √
TEMP Transducer
√ √
Ethanol 70%
Isopropanol 70%
The recommended disinfectants for NIBP cuff are:
Cidex, Sporicidin, Microzid, Isopropyl-alcohol 70%, Ethanol 70% Buraton liquid.
CAUTION
1 Do not use any disinfectant containing additional active ingredients other than those
listed.
2 Follow the manufacturer’s instruction to dilute the solution, or adopt the lowest
possible density.
3 Do not immerse any part of the monitor or any accessory into liquid.
4 After disinfection, no remaining disinfectant is allowed on the surface.
5 Check if the monitor and accessories are in good condition. If any aging or damage is
detected (e.g. the belt loses its elasticity), replace the damage part(s) or contact the
manufacturer for service before reusing them.
NOTE:
The manufacturer has no responsibility for the effectiveness of controlling infectious
disease using these chemical agents. Please contact infectious disease experts in your
hospital for details.
12.4 Sterilizing
Do not sterilize the monitor or the accessories, unless this is necessary according to your hospital
regulation.