Product Manual

F6, F6 Express Fetal & Maternal Monitor User Manual Monitor and Accessories
- 17 -
or confirm the operation. Press the control knob again, and the cursor will be able to move around
on the interface/menus.
Operation Procedure:
a) Rotate the control knob to move the cursor to the item you want;
b) Press the control knob;
c) One of the following three results will be achieved:
 A menu pops up on the screen, or the menu is replaced by a new one;
 A submenu with several options appears on the right of the item. If this item has more
than 8 options, they will be displayed in more than one page. Select PREV to switch to
the previous page, or select NEXT to switch to the next page.
 The function operates immediately.
NOTE:
1 The word “select” hereinafter stands for rotating the control knob cursor to an item
and then pressing the knob.
2 If the key sound is enabled, the monitor gives a normal key sound when the operation
is valid, and gives a sharp “Di” sound when the operation is invalid.
CAUTION
This monitor is a normal medical device. Please avoid violent operations such as
continuously pressing the keys or control knob.
3.1.2 Indicators
There are four groups of indicator on top of the screen and the front panel. From the top down
they are: alarm indicator, CHARGE indicator, AC indicator and Power indicator.
Indicator Status of Indicator Meaning
Flash or light up in
yellow
An alarm is active.
Alarm
Indicator
Off No alarm is active.
On The battery is being charged.
Charge
Indicator
Off
No battery or the battery is fully
charged.
On
The monitor is connected to AC power
supply.
AC Indicator
Off
The monitor is not connected to AC
power supply.