Product Manual

F6 and F6 Express Fetal & Maternal Monitor User Manual Printing
- 36 -
Item Information Description
1. Self-Check Trace
The monitor prints a self-check trace after being switched on. It is
used to check if the recorder paper is properly loaded.
2. Paper Settings
The paper settings of the monitor. It consists of the paper type and
paper style, e.g. “G 50-210”, indicating that the paper type is “F9-G”,
and the paper style is International.
3. Paper Type There are two types of paper: F9-G and F9-P.
4. Paper Style
The FHR pane range indicates the paper style.
American style: 30 ~ 240
International style: 50 ~ 210
5. FHR1 Mark The trace marked with “FHR1” is the FHR1 trace.
6. FHR2 Mark The trace marked with “FHR2” is the FHR2 trace.
7.
Trace
Information List
A list of current date, time, print speed, ID, FHR2 offset, HR, SpO
2
,
and TEMP is printed at the start of the monitoring and every ten
minutes afterwards. In the NIBP timer printing mode, the list also
includes SYS, DIA and MAP.
8. Smart Note The annotation of the event mark below.
9. HR Mark The trace marked with “HR” is the maternal HR trace.
10. SpO
2
Mark The trace marked with “SpO
2
” is the maternal SpO
2
trace.
11. NIBP
In the NIBP real-time printing mode, each NIBP measurement result is
printed on the paper in the order of SYS/DIA/MAP.
12. Page Mark
Each recorder paper pack has 150 pages. When you notice the page
mark comes to the end, remember to load new paper in time.
13.
CTG Analysis
Result
The CTG analysis results of FHR1 and FHR2.