Product Manual

F6 and F6 Express Fetal & Maternal Monitor User Manual Connection of T840 Telemetry System
- 127 -
Appendix 7 Connection of T840 Telemetry System
The T840 telemetry system of Rimkus Medixintechnik is compatible for use with F6 and F6
Express.
This appendix introduces how to connect the T840 telemetry system to F6 and F6 Express, and
how the monitors display the monitoring results.
The operation and maintenance of the T840 are described in OPERATOR’S MANUAL of T840
telemetry system. Reading through the manual will help you obtain the best possible results from
the system.
A7.1 Connecting T840 Telemetry System
Examine the rear panel of the monitor, and make sure it is configured with
a D-Sub concave interface.
In the accessory box, at least one of the following signal cables is provided. The signal cables are
used to connect the receiver unit to the fetal monitor. They both have a D-Sub convex socket and
a DB15 convex socket. Besides that, the Y-shape signal cable has an extra DB9 concave socket,
which can be used for network connection of the monitor.
Figure A7-1 Signal Cable Figure A7-2 Y-shape Signal Cable
① D-Sub Convex Socket ② DB15 Convex Socket ③ DB9 Concave Socket
Connection:
The following illustration shows how to connect the T840 telemetry system to F6 and F6
Express.
Figure A7-3 Connection of T840 and F6/F6 Express
① ② ① ③ ②