Product Manual

M3B Vital Signs Monitor Service Manual
- 37 -
For cleaning C5 CO
2
module or LoFlo CO
2
module:
1. Use a cloth dampened with isopropyl alcohol 70%, a 10% aqueous solution of sodium
hypochlorite (bleach), disinfectant spray cleaner such as mild soap.
2. Wipe down with a clean water-dampened cloth to rinse and dry before use. Make certain that
the sensor windows are clean and dry before reuse.
7.2 Maintenance Menu
Select “MAINTAIN” item in “SYSTEM MENU” to call up “ENTER MAINTAIN PASSWORD”
dialog box as shown below, in which you can enter password and then customize maintenance
settings. Factory maintenance function is only available for the service engineers of EDAN or
representative authorized by EDAN.
Figure7-2 Enter Maintain Password
User Maintain
Input the password 9 9 8 1 in the USER KEY box and press OK button, the USER MAINTAIN
menu will pop up, in which you can set up following items.
Figure7-3 User Maintain
n NET TYPE: set the net type as CMS.
n BED NO: you can set the bedside number as 1~16.
n LANGUAGE: You can set interface languages to ENG (ENG
LISH), CHN (CHINESE),