Product Manual

Patient Monitor User Manual Monitoring ECG
- 89 -
9.10.7 QTc Alarm Setup
Select ECG Setup > QT Analysis > Alarm Setup to change the following QT alarm settings:
 Separately switch on or off QTc alarm and ΔQTc alarm and set the alarm level.
 Set the thresholds of QTc alarm and ΔQTc alarm. When QTc value or ΔQTc value exceeds
the preset thresholds, an alarm will be triggered.
9.10.8 QT View
To enter QT view, please select ECG Setup > QT Analysis > QT View. In the QT View
interface, the color of current QT segment and QT value are consistent with the color of HR. The
color of baseline and QT value are yellow.
In the QT View interface, the user can save QT baseline through clicking Save as Base when QT
values gets stable. If no QT baseline is saved, the monitor automatically saves the baseline when
the first five minutes value appears. Besides, the user can record and print the QT view.