Product Manual

Patient Monitor User Manual Basic Operation
- 19 -
WARNING
Demo Mode is for demonstration purposes only. You must not change into Demo Mode
during monitoring. In Demo Mode, all stored trend information is deleted from the
monitor’s memory.
3.3.2 Standby Mode
To enter into standby mode, select Menu > Common Function > Standby, or press the shortcut
key on the screen directly, the monitor enters into standby mode after user’s confirmation.
In standby mode:
1. The monitor stops monitoring patients and stores previous monitoring data.
2. The monitor won’t respond to all alarms and prompts, except Battery Low alarm.
3. Audio alarm paused status discontinues. Audio alarm off, alarm off, alarm reset and alarm
latch status are not influenced.
4. All recording and printing tasks will stop.
5. MFM-CMS won’t update monitoring data, and will display monitor's standby mode. If
network is disconnected, monitor will make request for connection.
The monitor exits standby mode in any of the conditions:
1. The user clicks anywhere on the screen or presses any key (except Power ON/OFF key).
2. Battery Low alarm occurs.
After exiting standby mode, the monitor resumes monitoring, including parameter monitoring,
storage and alarm; users need to press Recorder shortcut key to restart recording.
NOTE:
The monitor is unable to enter into standby mode when exporting data.
3.3.3 Night Mode
To switch to night mode, you may:
 Select the shortcut key on the main screen, or
 Select Menu > Common Function > Night Mode.
NOTE:
In night mode, the sound of key, heart beat and pulse is muted; the alarm volume and
screen brightness are down to their minimum; the settings including key volume, beat
volume, PR volume, alarm volume and screen brightness are unavailable.