Product Manual

Patient Monitor User Manual Basic Operation
- 20 -
3.3.4 Privacy Mode
Only if the monitor is connected and admitted by MFM-CMS, the privacy mode can be activated.
To enter into privacy mode, you can select Menu > Maintenance > User Maintain > Shortcut
Setup > Privacy Mode (it is defaulted to be off). Press the shortcut key on the screen, the
monitor enters into privacy mode after user’s confirmation.
In privacy mode:
1. The screen displays message: Privacy mode and Patient is in monitoring without audio
alarm and alarm indicator lighting. Please click screen or hard key to exit.
2. Monitoring data, alarm information, stored data and monitor status are transmitted to
MFM-CMS.
3. Audio alarm paused status discontinues. Audio alarm off, alarm off, alarm reset and alarm
latch status are not influenced.
The monitor exits privacy mode in any of the conditions:
1. The user clicks anywhere on the screen or presses any key (except Power ON/OFF key).
2. Battery Low alarm occurs.
3. The monitor is disconnected with MFM-CMS.
NOTE:
The monitor is unable to enter into privacy mode when exporting data.
3.3.5 NFC Mode
NFC mode is designed when users need to constantly observe HR physiological alarm. In NFC
mode, the HR physiological alarm is automatically or always switched on, and user cannot turn
off it. To configure NFC mode, select Menu > Maintenance > User Maintain > Alarm Setup >
NFC Mode, set it to On or Off. NFC mode is off by default.
In NFC mode:
1. The HR physiological alarms are always on and can't be set to off by the user.
2. The user can't turn off the audio alarm permanently.
3. The audio alarm off status will be finished and the monitor enters normal alarm response
status. Pause Time will automatically switch to 120 s, which can be set to 60 s, 120 s, or 180
s manually.
4. The audio alarm paused status is not affected by entering NFC mode.
5. Symbol is displayed in the HR parameter area.
6. Monitoring data, alarm information, stored data and monitor status are transmitted to
MFM-CMS.
NOTE:
NFC mode and standby mode can't coexist. When the monitor enters the standby mode,
the NFC mode will automatically pause. After exiting the standby mode, the monitor will