Product Manual

Patient Monitor User Manual Basic Operation
- 22 -
3.5.3 Adjusting Beat Volume
Beat volume is from HR or PR, depending on your setting of the beat source. To change the beat
volume:
1. Select the shortcut key on the screen directly, or
2. Select ECG Setup > Beat Volume, then select the appropriate setting for the beat volume:
five bars represent the maximum volume and one bar represents the minimum volume. If
none of bars are selected, the beat volume will be off. Beat frequency has positive
correlation with measurement value.
3.6 Checking Your Monitor Version
To check the monitor version, please select Menu > Common Function > About to check the
monitor software revision.
3.7 Setting Languages
To change the language, please:
1. Select Menu > Maintenance > User Maintain, then type the correct password into the
displayed interface.
2. Select the Language option on the popup interface to open the language list.
3. Select the desired language from the list. To make the change validate, please restart the
monitor.
3.8 Setting Keyboard Languages
The monitor is equipped with Chinese keyboard, English keyboard and Russian keyboard. To
change the keyboard language, select Menu > Maintenance > User Maintain > Keyboard
Language, then select the desired language from the list.
NOTE:
The keyboard language will restore to the default language when the system language
changes. User can change the keyboard language as needed.
3.9 Calibrating Screens
To calibrate the screen, please refer to the following steps:
1. Select Menu > Maintenance > User Maintain, input the user password, and select
TouchScr Calibration on the User Maintain menu. User can also enter into calibration
interface through pressing shortcut key F9 in connected keyboard.
2. The symbol appears on the screen.
3. Click on the central point of the symbol .
NOTE:
1 If calibration file is lost or damaged, the monitor will automatically enter into screen