SOUNDBAR BLUETOOTH SPEAKER BS-672 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE TERMINALS CAN BE FULLY INSERTED TO PREVENT ANY EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Read these instructions carefully. Keep these instructions in a safe place. Heed all warnings. Follow all instructions. Do not use this product near water.
15. 16. 17. 18. 19. 20. 21. 22. 23. has been spilled or objects have fallen into the product, the product has been exposed to rain or moisture, does not operate normally, or has been dropped. This product shall not be exposed to dripping or splashing water and that no object filled with liquids such as vases shall be placed on the product. Do not overload the wall outlet. Use power source only as indicated. Use replacement part as specified by the manufacturer.
FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
DIAGRAM 1. Aux Input Jack 2. Optical Input Jack 3. DC Power Jack 4. Wall Mount Holes 5. Power / Mode Button 6. Play / Pause Button 7. Volume + / Next Button 8. Volume - / Previous Button 9. Power Button 10. Mode Button 11. Play / Pause Button (Bluetooth Mode) 12. Previous Button (Bluetooth Mode) 13. Next Button (Bluetooth Mode) 14. Unpair Button 15. Equalizer Button 16. Mute Button 17. Volume + Button 18.
POWER Using the AC adapter provided, plug the smaller end into the DC Power Jack located on the back side of the unit and plug the other end into the AC wall socket / outlet. For the remote control, gently slide out the battery compartment cover located on the back side. Insert 2 x AAA batteries (not included) following the + / - polarity signs as indicated in the compartment and replace the battery compartment cover. IMPORTANT: • Be sure that the batteries are installed correctly.
Press and hold the Power / Mode Button to turn off the unit. The remote control has separate buttons for Power and Mode. Simply press the Power Button on the remote control to turn on / off the unit and use the Mode Button to toggle through the various play modes. BLUETOOTH MODE NOTE: Refer to the user manual of your Bluetooth enabled device for instructions on pairing and connecting Bluetooth devices. 1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing process.
smartphone, tablet, MP3 player or other audio source. 2. Turn on the unit and toggle to the AUX-in mode with the Amber LED indicator light on the front panel. 3. Use the native controls on the connected device to play, pause and control the music output. OPTICAL INPUT MODE Requires an optical audio cable (not included) and a TV or other audio output device with optical output (not included). 1.
LIMITED WARRANTY Warning: Some Products may contain components that are small enough to be swallowed. Keep out of the reach of children. Before returning your Product for service under this Warranty, (i) please read the instruction manual carefully and visit our website at www.borne-lifestyle.com for product updates and extended support documentation (e.g.
EXCEPT FOR THE EXPRESS WARRANTIES STATED ABOVE AND TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCT IS PROVIDED “AS IS”, AND BORNE ELECTRONICS DISCLAIMS ALL OTHER WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF (I) MERCHANTABILITY, (II) FITNESS FOR A PARTICULAR PURPOSE, OR (III) NON-INFRINGEMENT OF THIRD PARTY RIGHTS.
