PORTABLE BLUETOOTH CD PLAYER PCDBT01 PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Read these instructions carefully. Keep these instructions in a safe place. Heed all warnings. Cleaning: Unplug this unit from the power source and remove the batteries before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a damp or dry cloth. Only use attachments/accessories specified by the manufacturer.
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE • As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. • Stop operation immediately if any liquid or solid object should fall into the cabinet. • Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly. • Do not put anything in the safety slot.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
LOCATION OF CONTROLS 1. LCD Display 2. Play/Pause Button 3. Stop/Power Off Button 4. Mode Button 5. Program Button 6. Skip/Search Backward Button 7. Skip/Search Forward Button 8. CD Door Button 9. Battery Compartment Cover 10. Volume Decrease Button 11. Volume Increase Button 12. Earphone Jack 13. DC Power Input Jack 14.
SET UP A. The Portable Bluetooth CD Player may be powered by batteries (not included) or by using the provided USB to Barrel Power Cable and plugging it into your computer or a USB wall charger (not included). • For battery operation, open the Battery Compartment Cover on the backside of the unit by sliding the cover open and gently lifting the cover. Install 2 x “AA” size batteries (not included) according to the correct polarity (+/-) diagram in the battery compartment or as shown in the above diagram.
NOTE: When the unit is being powered by the USB to Barrel Power Cable, the unit will automatically stop using battery power. If using an external AC adapter with a connected barrel cable (not provided), make sure the output voltage is rated DC 4.5V 650mA with a centre negative pin. IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit and void the warranty.
track or press it again to skip to the previous track. Press and hold the Skip/Search Backward Button to rewind within the current track, PROGRAM PLAY MODE This function allows music tracks to be played in a programmed sequence. 1. 2. 3. 4. 5. 6. 7. Press the Program Button. “00” (track number) and “PROG” will start to flash on the left side of the LCD Display. Press the Skip/Search Backward / Forward Button to select the track to be programmed. Press the Program Button again to store the selection.
THROUBLESHOOTING The unit will not turn on. • Check that the batteries are inserted to the correct polarity (+/-). • Replace with fresh new batteries. • Ensure the USB to Barrel Cable connector and the USB connector is connected properly. The CD will not play properly. • Ensure the CD is inserted properly and the compartment is closed. Press the Stop button before playing the CD. • Make sure the CD disc is clean and free of scratches, or try another CD.
LIMITED WARRANTY Warning: Some Products may contain components that are small enough to be swallowed. Keep out of the reach of children. Before returning your Product for service under this Warranty, (i) please read the instruction manual carefully and visit our website at www.borne-lifestyle.com for product updates and extended support documentation (e.g.
CUMULATIVE PRODUCT COSTS PAID BY THAT CUSTOMER FOR THE PRODUCT CAUSING SUCH DAMAGES, IF ANY. This Warranty gives Customer specific rights, and Customer may also have other rights that vary from jurisdiction to jurisdiction. To obtain Warranty service, Customer must call Borne Electronics Support prior to making a Product Return.
FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.