User guide

Eddy User's Guide
35
4.3 Connecting Eddy
In order to view current Eddy’s settings or modify them, you need to make a Web or Telnet connection to Ed
dy. IP address is required information to make a connection.
There are two ways you can know the current IP address of Eddy.
First is to use a built-in, alias IP address of “10.10.1.1”.
Second is to use “Detector” application provided in the Utility & Documents CD. This application allows searc
hing for Eddy modules on the network.
◆ The factory default IP address: 192.168.0.223
Eddy’s default IP address is set to 192.168.0.223. In order
to connect with this address, you need to change networ
k configurations so that your PC can connect to the IP 19
2.168.0.223. Please refer to an example below, and note t
hat values don’t necessarily have to be identical to the ex
ample below.
◆ Factory default alias IP address: 10.10.1.1
In case you configure Eddy to use DHCP to obtain an IP
address automatically, you might find it hard to know th
e IP address to connect to. To provide users with an easi
er way to know the current IP address, Eddy has a fixed
alias IP that is always accessible. Use the address below
whenever you cannot find out Eddy’s IP address.
In order to connect with this address, you need to change
network configurations so that your PC can connect to th
e IP 10.10.1.1. Please refer to an example below, and not
e that values do not necessarily have to be identical to the
example below.
 Since Eddy-S4M doesn’t support LAN port so that do
esn’t include below.