User`s guide

Chapter 5: Specifications Inspection Techniques

Eddy Current Array (ECA)

Remote/Near-Field Testing (RFT / NFT)

Number of channels

Ectane 2 E64 Up to 64 channels for each ECT

frequency (max. 5 frequencies)

Ectane 2 E128 Up to 128 channels for each ECT

frequency (max. 5 frequencies)

Ectane 2 E256 Up to 256 channels for each ECT

frequency (max. 2 frequencies)

Up to 128 channels for each ECT

frequency (max. 5 frequencies)

Multiplexer SmartMUX™: integrated, universal,

and programmable

Connector type

a. The Ectane 2 uses an ID device found in Eddyfi probes. This ID device contains information that helps set up acquisitions and

confirm compatibility between setup and probe.

Single or double, 160-pin connector

Probe inputs 4 on 19-pin RFT/NFT/MFL connector

8 on 41-pin E

XTENDED ET connector

Number of frequencies 5

Frequency range 5 Hz – 250 kHz

Generators / Coil drivers 2

Generator output / Coil drive 20 V, peak-to-peak

Receiver gain 50 dB range, 36 – 86 dB

Acquisition / Sampling rate Up to 20 000 per second

Connector type 19-pin RFT/NFT/MFL connector

41-pin E

XTENDED ET connector